This post was last updated on
The holidays are here! Make this simple yuletide greetings card with your Cricut Maker in under ten minutes! Check out practicallyfunctional.com for the full tutorial. #cricut #cricuttutorial
If you love making handmade holiday cards for family and friends, you’re going to love this project! This Yuletide greetings card is so detailed and gorgeous, but the Cricut Maker makes short work of it, and you can make this beautiful card in just 10 minutes!
You can find this Yuletide Greetings card in Cricut Design Space, and it’s free with a Cricut Access subscription!
Simple Yuletide Greetings Card
- Time spent doing stuff: 5 minutes
- Time spent waiting around: 5 minutes
- Total project time: 10 minutes
Open the Yuletide Greetings card project in Cricut Design Space. If you want to make any changes or adjustments, click the “Customize” button to open the project canvas, otherwise just click the “Make It” button to make the 5” x 7” card and envelope as is.
There are four mats for this project. Design Space will walk you through the tools and accessories you need for each mat, so just follow the on-screen instructions.
I like to use “Cardstock (for intricate cuts)” as my material setting for the cardstock mats on this project; that setting uses slightly less pressure while cutting, but automatically cuts every line twice. I find that this works great for intricate cuts because it doesn’t drag or tear any of the material.
1. White cardstock: use the StandardGrip mat and load the paper pretty side facing up. Select “Cardstock (for intricate cuts)” as the material for this mat. Load the green Cricut pen in clamp A and the scoring wheel in clamp B. After the Maker scores and draws it will pause and ask you to load the fine-point blade in clamp B.
2. Green cardstock: use the StandardGrip mat and load the paper pretty side facing down. Select “Cardstock (for intricate cuts)” as the material for this mat. Load the scoring wheel in clamp B, then switch to the fine-point blade in clamp B when Design Space prompts you to.
3. Green felt: use the FabricGrip mat and load the rotary blade in clamp B. Select “Felt, Acrylic” as the material for this mat.
4. Red glitter cardstock: use the StandardGrip mat and load the paper pretty side up. Select “Cardstock (for intricate cuts)” as the material for this mat. Load the fine-point blade in clamp B.
After all four mats are cut out and all of the extra pieces are weeded away, glue the cut out layers together. The green felt goes on the bottom, then the red glitter on top of that, and then the white piece of cardstock with cutouts on the very top. As you glue the layers together, make sure the holes line up in all three layers.
Once the cut out pieces are glued, use the needle and green thread to stitch “veins” onto the holly leaves.
Then glue the entire 3-layered piece onto the front of the folded white card.
Fold in the sides of the green envelope, then fold up the bottom “pointy” piece. Glue the bottom piece onto the side pieces to make an envelope. Fold the top round piece down, and you can tape it closed or glue it closed once you’re ready to add your card.
And you’re done!
You have a gorgeous, detailed card that will impress everyone!
Shop this project:
Latest posts by Jessi Wohlwend (see all)
- Which Is The Best Cricut Machine In 2019: All 4 Cricut Models Compared - April 26, 2019
- FREE Mrs. Meyer’s Products In Limited Edition Spring Scents Are Here! - March 16, 2019
- Great Wolf Lodge Is Not For The Faint Of Heart (But It’s Worth It!) - March 15, 2019
- Deep Clean Your Bathroom With These 10 Simple Hacks! - March 4, 2019
- Tired As A Mother SVG Cut File - February 26, 2019