How To Make 3D Paper Stars With The Cricut Scoring Wheel

Learn how to use your Cricut scoring wheel to make these cute 3D paper stars! These make the cutest nursery mobile and are great for holiday crafts too! #cricutcrafts #cricutscoringwheel

These 3D paper stars are so quick and easy to make, you’ll want to make them as decorations for everything! All you need is a Cricut Maker, the Cricut Double Scoring Wheel, and some fun paper; your Cricut does all the work for you in just minutes, and you end up with super cute 3D paper stars. Hang stars on a wall in a kid’s room, string them up from the ceiling for party decor, attach a dowel and stand them up in a cute cup or vase as table decor…the possibilities are endless! Today I’m going to show you how to make 3D paper stars with your Cricut in just a few minutes.

How to make 3d paper stars with the cricut scoring wheel

Pin This!

A few weeks ago Cricut launched their newest product: the Cricut Scoring Wheel! The Cricut scoring wheel is an interchangeable tool that works with the Cricut Maker. You can learn all about it here, but today I’m going to share an awesome project with you that I made using the double scoring wheel.

And if you’re still on the fence or still have questions about the Maker, check out my post answering all the common questions about the Maker!

How To Make 3D Paper Stars With The Cricut Scoring Wheel

  • Time spent doing stuff: 15 minutes
  • Time spent waiting around: 5 minutes
  • Total project time: 20 minutes

Tools

Materials

Instructions

Check out the video below to see the whole project from start to finish! (You can also find written instructions below the video.)

[embedyt] https://www.youtube.com/watch?v=I7-aXmVRRhY[/embedyt]

Start by opening up Cricut Design Space. You can grab the free SVG cut file at the bottom of this post, then upload it into Design Space. (This tutorial will show you how to upload your own images or SVG files to Design Space.)

There are three different-sized stars in different colors in this project. You can resize the stars if you wish, or make them all the same color by cutting them out of the same sheet of paper. Once you’re ready to make your 3D paper stars, click the green Make It button.

When you are scoring a project, you always want to score on the back of your material. That means that you should always load your material onto your mats “pretty” side down, and set your mats to “Mirror” in Design Space. For these stars it doesn’t actually matter which side is left and which is right, but for a project with words or any other thing that isn’t symmetrical, make sure you set your mats to Mirror before you start cutting.

Once your mats are mirrored, click Continue to send the project to your machine.

In a project where something is both scored and cut, the scoring usually happens first. The software will tell you to install the Cricut Scoring Wheel in clamp B. You install the scoring wheel the same way you would install any blade: open the clamp, place the scoring wheel into the clamp, making sure the open gears face towards the back of the machine, and close the clamp to tighten.

Install the cricut double scoring wheel to make 3d paper stars

Then load your mat into the machine (pretty side down!) and press the flashing Go button.

When the Cricut finishes scoring the star it will pause and tell you to put the fine-point blade into clamp B so that it can cut out the star.

Cricut design space install fine point blade to continue cutting out 3d paper stars

The other two mats will be exactly the same: the software will walk you through switching between the Cricut scoring wheel and the fine-point blade to cut out the rest of the stars. Once they are cut out, you’re ready to start folding!

3d paper star scored and cut out by the cricut maker

You always want to fold into your score lines, and not away from them, which is why you score on the back. Place the star pretty side down on your work surface and fold the paper up along each score line. You’ll see just how easy it is with the scoring lines made by the Cricut Scoring Wheel, and if you’re using a coated paper, you’ll see there are no cracks on the front!

Crisp clean fold with no cracking from cricut double scoring wheel

Once you’ve folded along all the score lines, you need to refold a few of the lines backwards to create the peaks and valleys of the 3D star. You can see exactly how to make these folds in the video above, but basically the folds going to the points of the star stay folded the way they are, and the folds in between the points get folded backward.

(Even though these folds eventually get folded backwards, you always want to fold into your score line first to prevent any cracking.)

Once you’ve refolded the lines between the points, you’re done!

How to make 3d paper stars with the cricut scoring wheel

Repeat for all your other stars, and you have super simple 3D paper stars made with the Cricut scoring wheel!

3d paper stars made with cricut maker and cricut scoring wheel

You can hang them on a wall as decor (great for a nursery or kid’s room!), punch a hole and hang them up by strings, attach a dowel and stick them in a cup or vase as a centerpiece, or anything else you can think of!

3d paper star tutorial

Grab the free 3D paper stars SVG cut file or printable PDF below!

And don’t forget to check out my other Cricut tutorials and project ideas!

I hope this list helps inspire you to make some new projects with your Cricut! If you’re brand new to Cricut, check out some of my beginner tutorials:

How to make 3d paper stars with the cricut scoring wheel practically functional facebook share 8

3D Paper Stars

0 from 0 votes
Learn how to use your Cricut scoring wheel to make these cute 3D paper stars! These make the cutest nursery mobile and are great for holiday crafts too!
Active Time 15 mins
Cricut Cutting Time 5 mins

Materials

  • 3 sheets foil poster board

Instructions
 

  • Open the free design file in Cricut Design Space and click the green Make It button.
  • Set your mats to Mirror and click Continue. Then install the double scoring wheel as directed.
    Install the cricut double scoring wheel to make 3d paper stars
  • Load the foil poster board shiny side down on the LightGrip mat, and then load the mat into the machine and press the flashing Go button.
  • Switch to the fine point blade when instructed by the software.
    Cricut design space install fine point blade to continue cutting out 3d paper stars
  • Carefully remove the star from the mat.
    3d paper star scored and cut out by the cricut maker
  • Fold the star along all of the score lines, shiny side out.
    Crisp clean fold with no cracking from cricut double scoring wheel
  • And you're done!
    How to make 3d paper stars with the cricut scoring wheel

Notes

You can grab the free SVG files and instructions at the bottom of this post here: https://www.practicallyfunctional.com/how-to-make-3d-paper-stars-with-the-cricut-scoring-wheel/

Save your favorite projects!

Create a free account to easily save your favorite projects, tutorials, and recipes.

Create Account

Want to share this project with your friends? Just click any of the share buttons on the left to share with Facebook, Pinterest, Twitter, etc.!

Shop This Project:

Signature

Disclosure: I received compensation from Cricut in exchange for my participation in this campaign, and my honest discussion of their new products. But the Cricut scoring wheel is seriously amazing and all opinions in this post are 100% my own. I would never write a post about something I didn’t think was useful or interesting for you guys, and Practically Functional will only publish sponsored posts for companies or products I love and believe in! 🙂

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

 

Jessi Wohlwend

I believe that anyone can do crafts and DIY projects, regardless of skill or experience. I love sharing simple craft ideas, step by step DIY project tutorials, cleaning hacks, and other tips and tricks all with one goal in mind: giving you the tools you need to “do it yourself”, complete fun projects, and make awesome things!

You May Also Like

Reader Interactions

  1. Carol says

    4 months ago

    The SVG is not working for me neither. Please help.

    • Jessi Wohlwend says

      4 months ago

      Are you having trouble downloading it or opening it from the email I sent, or problems when you try to upload it to Cricut Design Space? If it’s the former, hen you click the link in the email to download the file, it will open the svg file inside of a browser. In order to download the svg file, just right click the image in the browser and click Save As.

  2. Nina says

    12 months ago

    Hi, I just tried to download the SVG file, but it will not work for me. Is there another way around this? Thanks!

    • Jessi Wohlwend says

      5 months ago

      When you click the link in the email to download the file, it will open the svg file inside of a browser. In order to download the svg file, just right click the image in the browser and click Save As.

  3. Casey Unangst says

    1 year ago

    Hi. I signed up for your newsletter and got the file in my email but it is a single star of all cut lines. Is there a way to get the correct svg file for the 3d paper stars please? I am excited to use my double scoring wheel!!

    • Jessi Wohlwend says

      1 year ago

      Hey Casey! When you upload the SVG to Design Space it automatically sets all of the lines to “cut”, but it’s easy to fix it. Just select the dotted lines on the interior of the star and change the Linetype drop down menu at the top menu bar from “cut” to “score”. As long as the outer lines are set to “cut” and the inner lines are set to “score” it should work just fine!

  4. Pam Bratton says

    2 years ago

    Is there a way to do this on a cricut air with scoring pen?

    • Jessi Wohlwend says

      1 year ago

      Yep, you can use the scoring stylus instead if you don’t have a Maker and the Scoring Wheels. Usually the scoring wheels get a much crisper and cleaner score line in your project than the stylus will, but you can totally do it with the stylus; just be a little more careful when folding the scores so the material doesn’t crack!

  5. Ell says

    2 years ago

    The video is awesome. I just signed up for your newsletter. Can I print two of them and then glue them together with a string in the middle? I’m thinking about making them for a baby mobile. Thanks!

  6. GrandmaConnie says

    2 years ago

    The link to the file does not allow access to open in Cricut Design Space – I would love to gain access. I also tried to get the SVG file via email but even though it says sign up was a success I never receive the email and it is not in may spam folder. I much prefer receiving the SVG file as I want to make these smaller.
    Thank you for your wonderful video! I can’t wait to get the file! ;o)

    • Jessi Wohlwend says

      2 years ago

      Oof, so sorry for the super late reply! I’ve been having issues with Cricut allowing other people to access my projects inside of Design Space and I don’t know why. But I will email you the SVG file right now!

Load more comments

Leave a Comment or Review

Your email address will not be published. Required fields are marked *

Rating