Resize images as necessary and separate the images into the colors you'd like for your project using the contour tool.
Click the green “Make It” button to send the design to your Maker.
In the Prepare Mats screen, make sure the Mirror switch is toggled on for all of your mats (you have to set it for each mat individually).
Click the green “Continue” button.
Select “Light Cotton, 3 layers” as your material.
Install the rotary blade in your Maker.
Preheat your EasyPress 2 to 315 degrees Farenheit.
Cut your fabric and a piece of Heat N Bond to the right size to fit on your FabricGrip mat.
Press the Heat N Bond on to the back of the fabric piece using the EasyPress 2 for about 7 seconds.
Load your fabric and interfacing onto the FabricGrip mat with the fabric side down, then load the mat into your machine.
Press the flashing “Go” button to start the cut.
Unload the mat when it’s finished, and repeat until all of your mats are cut.
Pull away the extra background fabric and then gently peel the cut fabric off the mat.
Peel the paper backing off of the cut fabric and position the fabric on your pajama shirt (make sure the interfacing side is facing down!) Put the EasyPress 2 on top of the design and press for 30 seconds.
Flip the shirt inside out and press again from the back for 15 seconds to make sure it’s really stuck on there!
Save your favorite projects!
Create a free account to easily save your favorite projects, tutorials, and recipes.