Toggle the Mirror switch on for the iron on mats (but leave it off for the fabric mats.) Click the green Continue button.
Set the material to "Cotton" for the fabric mats and "Iron On" for the iron on mats.
Insert the washable Fabric Pen in the accessory clamp and the rotary blade in Clamp B.
Place the fabric on the FabricGrip mat, printed side down, and roll it with the brayer to make sure it's stuck.
Load the mat into the machine, then start the cut by pressing the flashing Go button. Repeat until all mats are cut.
Carefully weed away the background iron on vinyl from all pieces using the weeder tool.
Use the tweezers to remove the fabric pieces from the FabricGrip mat.
Pre-heat your EasyPress according to the settings in the Cricut Heat Guide and position your letters on top of the fabric squares. Press the letters for 30 seconds, then flip the squares and press again.
Sew the fabric squares together into a "t" shape.
Then sew all of the edges together to form the squares into a box shape, leaving just one edge un-sewn so that you can stuff the block.
Fill the block with batting until it's nice and full.
Sew the last little bit closed by hand.
Repeat for all of the blocks, and you're done!
Save your favorite projects!
Create a free account to easily save your favorite projects, tutorials, and recipes.