This wall-mounted lint bin is perfect for a small laundry room: make it in under ten minutes with a Cricut Joy and Smart Adhesive Vinyl! (The screenshots in these instructions were made using the Cricut Design Space app on an iPhone.)
Open the lint bin graphic in Cricut Design Space. Select the graphic and click the Edit button, then change the size as needed.
Select "Without Mat" for the load type. (Always use this setting when cutting Smart materials with a Cricut Joy.)
Make sure the preview of the cut looks correct, then tap Continue in the lower right corner.
Select "Smart Vinyl - Removable" as the material.
Make sure the fine point blade is loaded into your Cricut Joy.
Load the Smart Vinyl into the Cricut Joy.
Tap Go to begin the cut.
Tap "Unload" to unload the material from the Cricut Joy when the cut is complete.
Weed away any extra background vinyl using the weeder tool.
Trim a piece of transfer tape to the same size as the Lint Bin decal.
Peel the paper backing off of the clear transfer tape, then position the tape on top of the Lint Bin decal.
Press the transfer tape firmly onto the adhesive vinyl (use the scraper tool if you want), then carefully peel back a corner of the transfer tape. The adhesive vinyl should come off the paper backing along with the transfer tape.
Position the Lint Bin decal on the front of the mailbox and press down firmly using the scraper tool.
Carefully peel up the clear transfer tape, leaving the adhesive vinyl decal stuck to the mailbox.
Install the mailbox on the wall in your laundry room, and you're done!
Save your favorite projects!
Create a free account to easily save your favorite projects, tutorials, and recipes.