Go Back Email Link
Free printable dresser drawer labels and svg file for ikea trofast bins

DIY Kids Clothing Drawer Labels

4.80 from 10 votes
Organize kids clothing with these cute dresser drawer labels; the images make it so even young kids can help put away their clothes in the right drawer! Grab the free printable or free SVG file here!
ReviewCommentPrint
Active Time 30 minutes
Cricut Cut Time 20 minutes
Total Time 50 minutes
Cost $5

Equipment

Materials

Instructions
 

  • Open Cricut Design Space and import the free SVG file into a new project. Click the green "Make It" button at the top right to send the design to your machine for cutting.
    Open free dresser drawer labels svg file in cricut design space
  • Preview the mats, then click the green "Continue" button at the bottom right.
    Press green continue button on prepare mats screen
  • Choose your machine from the dropdown menu at the top of the page.
    Connect your cricut maker via bluetooth
  • Set the material to "Matte Vinyl" and make sure the fine point blade is installed in your machine.
    Set material to matte vinyl and load fine point blade
  • Position your adhesive vinyl face up on the green StandardGrip cutting mat, lining up the edges at the top of the sticky part of the mat.
    Apply adhesive vinyl to cricut cutting mat
  • Load the cutting mat into the machine by pressing the flashing Load/Unload button. Press the flashing Go button to begin the cut.
    Load cricut cutting mat into cricut maker
  • When the machine is done cutting, press the flashing Load/Unload button to unload the mat. Repeat these steps until all mats are cut.
    Unload cricut cutting mat and cut design from cricut maker
  • Remove the sheet of vinyl from the cutting mat and carefully weed away the excess background vinyl.
    Weed away background adhesive vinyl using cricut weeder tool
  • Peel the backing off of a small piece of transfer tape and position it over your design, pressing down firmly to ensure the transfer tape is stuck to the vinyl.
    Apply transfer paper over design
  • Peel the backing off the vinyl and position the transfer tape and vinyl on your dresser drawer, pressing down firmly to ensure the vinyl is stuck to the drawer.
    Use transfer paper to transfer design to dresser drawer
  • Carefully peel up the transfer tape, making sure the vinyl stays stuck to your drawer.
    Carefully peel transfer paper away from finished project
  • Repeat until all drawers are labeled.
    Kids dresser labels printable and svg for ikea trofast bins

Save your favorite projects!

Create a free account to easily save your favorite projects, tutorials, and recipes.

Create Account