Now that the weather is consistently below freezing most days, I think it’s the perfect time for ice lantern decorations! They’re really quick and easy to make, and so gorgeous! Today’s tutorial will show you how to make an ice lantern (or ice luminaria) in a few simple steps!
If it’s below freezing where you live, these guys can just live on your front porch or front steps all winter! But even if they only last a day or two, they’re a beautiful way to welcome guests to your home for a holiday party!
Plus you can make these for under $5! All you need are a few recycled cans, water, and some faux greenery which you can find at your local craft store.
How To Make Ice Lanterns (Ice Luminarias)
Here’s what you need:
- two empty tin cans, one small enough to fit inside the other with at least 1/2″ of room on either side and at the bottom
- faux greenery and berries
- wire clippers
- rocks or some other heavy item
Clean out your tin cans and remove the labels. Don’t worry about the sticky label residue; it won’t hurt the lanterns if it doesn’t all come off.
Put a small amount of water (about 1/2 C) into the larger tin can. Then put the smaller tin can inside the larger one. The smaller tin can should be floating inside the larger one at this point.
Add a few rocks to the smaller tin can to hold it down so that the tops of both cans are level. Then add tape on all four sides to help hold the smaller tin can centered in the larger one.
Now cut up your greenery and berries and stick them down into the water between the two cans. The berries float, so instead of cutting them into individual berries, I cut them into “sprigs” and just stuck the whole thing down the side of the can. This helped sort of wedge the greenery and berries between the two cans so they wouldn’t all float to the top.
Once you’ve added greenery everywhere, add a little more water between the cans, until the water is about 1/2″ to 1″ below the top of the can. If your water is already too full, pour some out. Remember, water expands as it freezes, so don’t fill it too full or the water will overflow as it turns to ice.
If it’s below freezing where you live, stick the cans outside overnight to freeze. If it’s too warm outside, just put them in your freezer overnight.
Once the water is frozen, run slightly warm water over the outside of the can and inside of the smaller can to help loosen the ice. Once the outsides melt a little bit you should be able to slide the ice lantern right out of the tin can molds!
Stick a small tea light in the lantern, light it, and enjoy the glow!
It’s just as pretty during the day too!
Want to share this tutorial with your friends? Just click any of the share buttons on the left to share with Facebook, Pinterest, Twitter, etc.!
More posts you might like!
Latest posts by Jessi Wohlwend (see all)
- Build A Simple DIY Trellis Screen To Hide Ugly Areas In Your Backyard! - June 23, 2017
- Creativity Unleashed #178 & Stencil Stop Giveaway - June 22, 2017
- Creativity Unleashed #177 & Stencil Stop Giveaway! - June 15, 2017
- DIY Hanging Storage Bins For Over The Toilet Storage - June 15, 2017
- Lifestyle Changes For A Healthy Summer - June 14, 2017